• חדש
SAWQF אוניברסלי 12 קג מתכוונן קיר טלוויזיה קיר הר הרכבה על פנל שטוח תמיכה במסגרת טלוויזיה תמיכה 30 מעלות עם מפתח

SAWQF אוניברסלי 12 קג מתכוונן קיר טלוויזיה קיר הר הרכבה על פנל שטוח תמיכה במסגרת טלוויזיה תמיכה 30 מעלות עם מפתח

Rating 
ILS 16.60

כמות
במלאי

עיצוב התאמה טלסקופי אוטומטי, טלסקופי ומסתובב חלקי המפתח מעבים, המבנה יציב והיכולת לשאת במשקל חזקה. הפיר המסתובב בעוצמה גבוהה יכול לעמוד בסיבובים מרובים ללא עיוות. תכנון בורג הבטיחות לא מבטיח שום סטייה תחת עומס. מתאים לרוב הטלוויזיות הפנל השטוחות של HDTV, טלוויזיות LCD, טלוויזיות LED, טלוויזיות פלזמה. עיצוב התאמה טלסקופי אוטומטי, טלסקופי ומסתובב. חלקי המפתח מעבים, המבנה יציב והיכולת לשאת במשקל חזקה. הפיר המסתובב בעוצמה גבוהה יכול לעמוד בסיבובים מרובים ללא עיוות. תכנון בורג הבטיחות לא מבטיח שום סטייה תחת עומס. מתאים לרוב הטלוויזיות הפנל השטוחות של HDTV, טלוויזיות LCD, טלוויזיות LED, טלוויזיות פלזמה. מפרט : סוג : גודל הניתן לניתוח גודל : 14-32 אינץ ' : חומר יצרן מגולגל קר מהקיר : 60-170 מ"מ / 2.3622 אינץ' קיבולת קיבול 100 מ"מ, 200 מ"מ x 200 מ"מ זווית שמאלה וימינה : 180 מדרכה : תוקף שחור : עיצוב התאמה טלסקופי אוטומטי, טלסקופי וניתן לסיבוב. חלקי המפתח מעבים, המבנה יציב והיכולת לשאת במשקל חזקה. יכול לעמוד בסיבובים מרובים ללא עיוות. תכנון בורג הבטיחות לא מבטיח שום סטייה תחת עומס. מתאים לרוב הטלוויזיות של HDTV שטוח, טלוויזיות LCD, טלוויזיות LED, TVSMA PLASMA. התקנה והוראות פעולה : 1. בעזרת הקיר כתבנית, קדחו ארבעה חורים בקוטר של 10 מ"מ ועומק של 50 מ"מ בקיר הבטון.

מאפיינים מוצהרים

Type:
Adjustable
Applicable size:
14-32 inches
Material:
cold rolled board
Distance from wall:
60-170MM / 2.3622 inches
Maximum capacity:
12KG / 26.46LB
Tilt angle up and down:
30 degrees
VESA standard pitch:
50mm x 50mm, 75mm x 75mm, 100mm x 100mm, 200mm x 200mm
Tilting angle left and right:
180 degrees
Colour:
Black
feature:
Automatic telescopic adjustment design, telescopic and rotatable.:
The key parts are thickened, the structure is stable, and the ability to bear weight is strong.:
The high-strength rotating shaft can withstand multiple rotations without deformation.:
The safety screw design ensures no deviation under load.:
Suitable for most HDTV flat-panel TVs, LCD TVs, LED TVs, plasma TVs.:
Installation and operation instructions:
1. Using the wallboard as a template, drill four holes with a diameter of 10mm and a depth of 50mm in the concrete wall. Then four plastic concrete anchors are wedged into the holes.:
2. Install the wall panel, put the wall panel on the wall, and then screw the four square head bolts into each plastic concrete anchor bolt through metal washers, so that the four square head bolts, the plastic concrete anchor bolt and the wall are fixed .:
3. Install the monitor bracket to the back of the flat-screen TV:
Screw the four bolts into the holes on the back of the flat-screen TV, make sure that the distance between each bracket and the top of the flat-screen TV is equal and centered as much as possible. The parts should be selected according to the size of the holes on the back of the flat-screen TV.
4. Adjust the angle of the LCD to a suitable position between -5°~+15° by hand.:
notes:
-When purchasing, please check that the hole distance of the TV is the same as the product, and the weight is within the tolerance range of the product.:
-The number of product accessories will vary, but it will not affect installation and use. :

ההצעות הטובות ביותר