50 pcs M10 חוט חוט תוספות נקבה זכר הפחתת כלי תיקון אגוזים אטב נירוסטה M10X1.25

מאפיינים מוצהרים

Item Type:

Thread Inserts

Material:

SUS304

Model:

M10x1.25

Thread Specification:

M10x1.25 (mm)

Outside Diameter Before Installation:

Approx. 12 ~ 15.5mm / 0.5 ~ 0.6in

Diameter of Drilling Drill Bit for Installation:

Approx. 10.3mm / 0.4in

1D/1.5D/2D/2.5D/3D:

Length After Installation:

Approx. 10mm / 0.4in

15mm / 0.6in:

20mm / 0.8in:

25mm / 1in:

30mm / 1.2in :

Thread Protective Sleeve Model Specification Description:

For Example

1. Drilling:

Use the drill bit of the size listed in the parameter table of the wire thread insert to drill the hole. Be careful not to drill the hole into a cone shape. The chips generated by the drill hole must be blown out with compressed air. After drilling, the counterbore should not exceed the depth of 0.4 pitch. Too large counterbore is not conducive to the screwing of the wire thread insert.:

2. Tapping:

3. Installation:

4. Remove the handle (break off the mounting handle):

5. Unscrew: